IC697PWR711 100 Watt Power Supply Module

Compare
Category:

Description

The IC697PWR711 is a GE Fanuc manufactured 100 Watt Power Supply
Module for the Series 90-70.
GE Series 90-70 Cpu Parts,Io Bus Terminator Plug,Ge Fanuc Terminal
Block PLC CPU PARTS Programmable PLC Communicate MODULES Robots
DCS.

Features include operation from 120 VAC, 240 VAC, or 125 VDC, and
there are three output voltages (100 watts total) as follows: +5
VDC output up to 20 amps; +12 VDC output up to 2 amps; -12 VDC
output up to 1 amp. Other highlights include slide-in rack mount
construction, electronic short circuit overcurrent protection, two
rack operation from a single power supply, power factor correction
for AC operation, and a jumper for overvoltage protection devices.

This module is rack-mounted and plugs directly into a 48-pin
backplane-mounted connector in the leftmost slot of any standard
IC697 rack or VME Integrator’s rack. It provides +5 volt, +12 volt
and -12 volt power, and logic level sequencing signals to the
backplane. The IC697PWR711 can be used in a single rack application or may to provide power
to a second rack if the total load is within the supply rating. A
prewired cable allows interconnection to the second rack. The power
supply output will ride through at least one input line cycle with
a total loss of input power at full load. Protection is delivered
for overcurrent and overvoltage fault conditions.

This power supply module can operate from 120 VAC or 240 VAC
nominal inputs. A nominal 125 VDC source is also an option. The
specified range of operation is from 90 VAC to 264 VAC and from 100
VDC to 150 VDC. For uninterrupted operation (more than one hour) at
low line voltages and high temps, some power derating must be
applied.

IC697PWR711Power Supply

IC697CHS750 A five slot rear mounting PLC rack, the GE Fanuc 90-70
IC697CHS750 accepts all IC697 PLC module types. Featured on the GE
Fanuc 90-70 IC697CHS750 are rear…
IC697CHS770 GE Fanuc 90-70 IC697CHS770 Accepts all IC697 PLC module
types, and IC687 (VME) I/O and Communications module types. GE
Fanuc 90-70 IC697CHS770 Accepts plug-in… GENERY ELETRIC
IC200ALG264

GENERY ELETRIC IC200ALG322

GENERY ELETRIC IC200ALG620

GENERY ELETRIC IC200ALG630

GENERY ELETRIC IC200MDL740

GENERY ELETRIC IC693ACC310

GENERY ELETRIC IIC693ALG223

GENERY ELETRIC IC693APU300

GENERY ELETRIC IC694ALG392

GENERY ELETRIC IC693MDL645

GENERY ELETRIC IC693MDL646

GENERY ELETRIC IC693MDL655

GENERY ELETRIC IC693MDL730

GENERY ELETRIC IIC693MDL740

GENERY ELETRIC IC693PCM301

GENERY ELETRIC IC693MDL753

GENERY ELETRIC IC693PWR321

GENERY ELETRIC IIC694BEM331

GENERY ELETRIC IC693PWR330

GENERY ELETRIC IC694APU300

GENERY ELETRIC IC694MDL645

GENERY ELETRIC IC694MDL655

GENERY ELETRIC IC694MDL740

GENERY ELETRIC IC694MDL753

GENERY ELETRIC IC695PBM300

GENERY ELETRIC IC698CRE030

GENERY ELETRIC PQMII-T20-C-A

GENERY ELETRIC DS215SDCCG1AZZ01B
IC66* Triple Modular Redundancy Systems. GE…

Reviews

There are no reviews yet.

Be the first to review “IC697PWR711 100 Watt Power Supply Module”

Your email address will not be published. Required fields are marked *