Description

IC697MEM715 is a CMOS expansion memory manufactured by GE
Automation and Controls. GE Series 90-70 Cpu Parts,Io Bus Terminator Plug,Ge Fanuc Terminal
Block PLC CPU PARTS Programmable PLC Communicate MODULES Robots
DCS. This particular fan tray provides an additional rack cooling
system with two fans per assembly. The rack fan is easily installed
as an accessory with the five slot and PACSystems RX7i nine-slot
racks. The IC697ACC621 is ideal for systems where heat build-up is
a potential problem. The system offers a low noise level and uses
ball bearings for an extended life span. The manufacturer does
recommend that the fans be wired to the same power source as the
PLC as this will ensure the fans run each time the PLC is actively
in use.To wire the fans, use the parallel cable assembly supplied
with the fan, which is located on the back of the fan assembly. The
IC697ACC621 fan tray is compatible with the IC697CHS750,
IC698CHS009, and IC697CHS109 racks. When mounted on the rack, the
unit is located on the bottom to allow the air to flow from the
bottom to the top of the rack for cooling. Easy installation is
completed with only a #2 Phillips head screwdriver. A minimum of 9
inches of space is needed between racks to remove each individual
fan and can be accomplished by removing the three screws from the
front lower panel of the rack. Simply position the fan assembly on
the bottom rack, and slide the flange on the rear of the assembly.
Align the holes, reinstall, and tighten the screws. Each fan has a
replaceable polyurethane filter that can be cleaned between
replacements if needed.

IC697MEM715 is available in different versions: 64 KB, 128 KB, 256
KB, and 512 KB. Typically these memories are used to expand the
data and logic memory in CPU 772/771 modules or in the programmable
co-processor module (alternatively known as IC697PCM711).
IC697MEM715 is configurable for both data and program storage.

IC697MEM715 is configured as a daughter board and is placed in the
same slot as the module in which it operates. Memory of the base
board and the daughter board are supplementary. In the event of
power loss, memory is retained by the battery on the base board
housing. Logic program memory is repeatedly error-checked by the
PLC CPU as a background task by way of checksum routine. When power
is cycled and during hard or soft resets, the PCM error
automatically checks storage memory. IC697MEM715 does not require an additional slot for configuration, and it is adjustable for storage of the program and data.

IC697MEM715 uses MS-DOS or Windows programming as software for
configuration. IC697MEM715 includes a lithium battery, which
manages a calendar clock. In case of power failure, the lithium
battery also retains the user memory. Battery shelf life is 10
years with an operating temperature of 20 0C or 68 0F. The ideal
memory retention capacity of the battery is six months. Removal of
the old battery should not occur unless installation of the new
battery is complete. IC697MEM715 requires no tools required for
installation and is field installable.

IC697CHS750 A five slot rear mounting PLC rack, the GE Fanuc 90-70
IC697CHS750 accepts all IC697 PLC module types. Featured on the GE
Fanuc 90-70 IC697CHS750 are rear…
IC697CHS770 GE Fanuc 90-70 IC697CHS770 Accepts all IC697 PLC module
types, and IC687 (VME) I/O and Communications module types. GE
Fanuc 90-70 IC697CHS770 Accepts plug-in… GENERY ELETRIC
IC200ALG264

GENERY ELETRIC IC200ALG322

GENERY ELETRIC IC200ALG620

GENERY ELETRIC IC200ALG630

GENERY ELETRIC IC200MDL740

GENERY ELETRIC IC693ACC310

GENERY ELETRIC IIC693ALG223

GENERY ELETRIC IC693APU300

GENERY ELETRIC IC694ALG392

GENERY ELETRIC IC693MDL645

GENERY ELETRIC IC693MDL646

GENERY ELETRIC IC693MDL655

GENERY ELETRIC IC693MDL730

GENERY ELETRIC IIC693MDL740

GENERY ELETRIC IC693PCM301

GENERY ELETRIC IC693MDL753

GENERY ELETRIC IC693PWR321

GENERY ELETRIC IIC694BEM331

GENERY ELETRIC IC693PWR330

GENERY ELETRIC IC694APU300

GENERY ELETRIC IC694MDL645

GENERY ELETRIC IC694MDL655

GENERY ELETRIC IC694MDL740

GENERY ELETRIC IC694MDL753

GENERY ELETRIC IC695PBM300

GENERY ELETRIC IC698CRE030

GENERY ELETRIC PQMII-T20-C-A

GENERY ELETRIC DS215SDCCG1AZZ01B
IC66* Triple Modular Redundancy Systems. GE…