Description

The IC697CPU772 is a single-slot PLC CPU with expandable memory
manufactured by GE Automation and Controls.GE Series 90-70 Cpu Parts,Io Bus Terminator Plug,Ge Fanuc Terminal
Block PLC CPU PARTS Programmable PLC Communicate MODULES Robots
DCS.

It is capable of controlling industrial machinery and processes in
real-time. A backplane mounted to the rack is used to communicate
with various I/O modules. The IC697CPU772 has a 12MHz 80C186
microprocessor capable of floating point calculations at speeds of
0.4 microseconds per Boolean function. Up to 8K analog I/O is
supported by this device, along with any mixture of 2K inputs and
outputs.

Various coprocessor and communications modules are supported by
this device in addition to IC697 LAN interface modules, IC660/IC661
bus controller modules, and link interface modules. This device
also supports all of the discrete and analog I/O modules from the
IC697 family.

The IC697CPU772 is configured and programmed by software running
from an attached computer. Configuration via dual inline package
switches and jumpers is not required for this device. Programming
this device is possible via serial, parallel, or Ethernet
connection using either MS-DOS or programs running on Win 95 or Win
NT. Setup and configuration for this device is secured with
password protection.

To operate the IC697CPU772, use either the three-position switch or
an attached computer with the correct software installed. A memory
expansion board is required for this device to function. This
expansion provides up to 512 kilobytes of data memory. Memory (RAM)
is maintained by the battery. The CPU must be initialized by a
connected computer before the memory board can be installed.

To install the IC697CPU772, refer to the product’s documentation. Power should be turned off
before attempting installation. Put the control switch into the
stop position. Install the memory expansion board. Connect the CMOS
battery to the device. Insert the device into the first slot of the
rack. Restore power to the rack.

Technical Specifications

---

Module Type: Expandable, Floating Point CPU Number of Slots: 1 (Single slot) Current Required: 1.2 Amps Number of Points: 2K inputs and outputs (any mix) Serial Ports: One Supports: IC660/IC661 I/O and IC697 I/O

IC697CHS750 A five slot rear mounting PLC rack, the GE Fanuc 90-70
IC697CHS750 accepts all IC697 PLC module types. Featured on the GE
Fanuc 90-70 IC697CHS750 are rear…
IC697CHS770 GE Fanuc 90-70 IC697CHS770 Accepts all IC697 PLC module
types, and IC687 (VME) I/O and Communications module types. GE
Fanuc 90-70 IC697CHS770 Accepts plug-in… GENERY ELETRIC
IC200ALG264

GENERY ELETRIC IC200ALG322

GENERY ELETRIC IC200ALG620

GENERY ELETRIC IC200ALG630

GENERY ELETRIC IC200MDL740

GENERY ELETRIC IC693ACC310

GENERY ELETRIC IIC693ALG223

GENERY ELETRIC IC693APU300

GENERY ELETRIC IC694ALG392

GENERY ELETRIC IC693MDL645

GENERY ELETRIC IC693MDL646

GENERY ELETRIC IC693MDL655

GENERY ELETRIC IC693MDL730

GENERY ELETRIC IIC693MDL740

GENERY ELETRIC IC693PCM301

GENERY ELETRIC IC693MDL753

GENERY ELETRIC IC693PWR321

GENERY ELETRIC IIC694BEM331

GENERY ELETRIC IC693PWR330

GENERY ELETRIC IC694APU300

GENERY ELETRIC IC694MDL645

GENERY ELETRIC IC200UDR005-AA

GENERY ELETRIC IC660BBD025

GENERY ELETRIC IC697BEM711

GENERY ELETRIC IC697BEM713

GENERY ELETRIC IIC697BEM731

GENERY ELETRIC IC697BEM733