Description

IC693CPU341 GE Fanuc Series 90-30 Processor 80K Bytes User Memory
10K Registers,Ge Plc 90-30 Cpu Parts,Rack Adaptor Bracket,Ge
Automation Controls,Ge Input Simulator Module CPU PARTS
Programmable PLC Communicate MODULES Robots DCS,IC693 CPUs with
firmware version earlier than 10.0 do not support DSM314. New
Features and Functionality of Firmware Release 8.40 Firmware
release 8.40 adds the Ignore Fatal Fault feature to the five CPUs
listed above. This feature is enabled/disabled with a new
configuration parameter. When set to Enabled, the CPU will ignore,
during power-up, any active PLC error mode condition. If enabled,
this feature also requires the Power-up Mode parameter be set to
Run or Last. If this feature is enabled, and a running CPU goes
into Stop/Fault mode, the CPU can be started back up in Run mode by
power-cycling the PLC. (Previously, it was necessary to use
programming software or a Hand-Held Programmer to restart a CPU
that had gone into Stop/Fault mode.) When it powers back up, the
CPU will ignore the current error mode condition and proceed to the
previous operating mode (Run/Stop). This parameter has no effect on
the detection and logging of faults. The default setting for this
parameter is Disabled. This feature is useful in applications where
the PLC experiences a nuisance fault, such as due to noise from a
nearby electrical storm, and no support person is on-site to
restart it; however, there may be applications where it is not safe
to use this feature, so read the warning below. To configure this
feature, you must use CIMPLICITY Machine Edition software, VersaPro
1.1 or later, or the MS DOS-based programming software, version
9.03 or later.

Product Details: Description:

IC693CPU341 GE Fanuc Series 90-30 Processor

Model Number:

IC693CPU341

Manufacturer(s) : GE Product Type:

Series 90-30 Processor

Warranty: 1 Year Plance of Origin: Made in USA Estimated Shipping Size:

Dimensions: 6″ x 6″ x 2″ (15 cm x 15 cm x 5 cm)

Weight: 0 lbs 10 oz (0.28 kg)

Advantage brands :

GE

IC693CPU363,IC697PWR711,IC693CPU364,IC693,IC697,IC695,IS200,IS215,DS200…

Allen Bradley

1756-L62,1756-L63,1746,1747,1756,1769,1794,2711P..

SCHNEIDER

140CPU43412U,140CPU65150,140CPU65160,140CPU,NOE,CRA,CPS,BMX,TCSE….

ABB

DSQC(07KT98 WT98,07KT97 WT97,DSQC679,IMASI23,IMDSO14…)

Bently Nevada

3500/42M,3500/22M,3500/95.3500/15…

TRICONEX

3805E,3008,3504E,3624,3700A,3721,4351B,4119A.. ..

Siemens MOORE

6ES7(1.2.3.4),6ES5,6DD,6DP….

GENERY ELETRIC IC200MDL740

GENERY ELETRIC IC693ACC310

GENERY ELETRIC IIC693ALG223

GENERY ELETRIC IC693APU300

GENERY ELETRIC IC694ALG392

GENERY ELETRIC IC693MDL645

GENERY ELETRIC IC693MDL646

GENERY ELETRIC IC693MDL655

GENERY ELETRIC IC693MDL730

GENERY ELETRIC IIC693MDL740

GENERY ELETRIC IC693PCM301

GENERY ELETRIC IC693MDL753

GENERY ELETRIC IC693PWR321

GENERY ELETRIC IIC694BEM331

GENERY ELETRIC IC693PWR330

GENERY ELETRIC IC694APU300

GENERY ELETRIC IC694MDL645

GENERY ELETRIC IC694MDL655

}

}

}

IC693CPU341 GE Fanuc Series 90-30 Processor 80K Bytes User Memory 10K Registers Images