ABB Advant OCS 200-PSMG Power Supply Module ABB Advant Controller 250 supplier and good distributor

Description

200-PSMG Power Supply Module.Advant Ocs Card,Abb Advant Ocs,Plc Analog Input Module CPU PARTS
Programmable PLC Communicate MODULES Robots DCS.The in/outputs are
filtered and galvanically isolated by optocouplers. LEDs are
located on the front. It is possible under system power to remove/
insert the units. The process is connected to the units via the
terminal base. I/O unit for ten digital input and six digital
output signals. The status of each signal is indicated by a yellow
LED. The outputs can deliver up to 2 A to the I/O system. Each
signal is isolated from the logic circuits by an optocoupler and
filtered with a low-pass filter. The inputs have a programmable
filter time. I/O unit for 16 digital input signals. The status of
each input signal is indicated by a yellow LED. Each signal is
isolated from the logic circuits by an optocoupler and filtered
with a low-pass filter. The inputs share a common ground
connection. The input signals are sampled at intervals determined
by a filter time. The signal status is changed only if two
consecutive samples are the same. The filter time is set with the
programming software.