Description
3401 TRICONEX DO 3401 Digital Output Module Triconex Invensys Cards
Analog Input Module CPU PARTS Programmable PLC Communicate MODULES
Robots DCS.
The main chassis of the Tricon PLC system contains two power
supplies, three main processor
modules, and communications and I/O modules as needed. It also has
a key switch with the
following positions to set the system’s operating mode:
! RUN is the normal operating mode, which gives read-only
capability by externally
connected systems including the TriStation. The switch is normally
set to this position,
and the key is removed and stored in a secured location.
! PROGRAM mode allows the Tricon PLC system to be controlled from
an externally
connected personal computer (PC) running the TriStation software.
This mode is
needed to download application programs to the Tricon PLC system.
! STOP terminates the execution of the current application program.
! REMOTE allows a TriStation PC or a Modbus master or external host
to write values to
application program variables.
1785-L20B/E
1785-L30B/C
1785-L40B/C
1785-L60B/C
1785-LT
1785-LT3
1785-LT3/A PLC 5/12
1606-XL480E
2711-K5A5L1
2711-K5A5
1746-P2
1746-A10
1747-L542
1747-SDN
1746-IB16
1746-OB16E
1746-P2
Points 16, commoned
Nominal output voltage 24 VDC
Specified operational voltage range 15 to 30 VDC
Absolute maximum output voltage 33 VDC
Absolute maximum reverse input
voltage – 0.6 VDC
Output current
Switching <4.8 A, self-limiting
3.0 A, typical
Degraded mode > 0.7 A, self-limiting
1.5 A, typical
Field alarms Loss of field power, output point shorted On or Off
Loop-back thresholds 0–5 VDC = Off region
6–14 VDC = transition region
15–30 VDC = On region
Leakage to load (Off state) <1 mA
Diagnostic glitch duration <2 ms, maximum 500 ?s, typical
Diagnostic fault coverage
Maximum toggle rate >20 ms
Minimum toggle rate Not applicable
On state voltage drop <1.0 VDC @ 1.5 A
Loop-back scan time <1.0 ms for all 16 points
Functional earth to protective earth isolation 500 VDC, minimum
Functional earth to functional earth (logic) isolation 800 VDC,
minimum
1746-NI4
1746-A10
1771-IBD-B
1747-L40E
6008-LTV
1394-AM03 & 1394-AM04
5110-A4 B
5120-P1 B
5130-RM1 A
5820-EI/A
1394-AM04/A
1394 AC SERVO CONTROLLER AXIS MODULE 10KW 3 pcs
1771-P7
1771-OW
1771-WA
1771-WD
1771-WB
1771-P7
1757-SRM /B
1772-LP3
1785-L60B
}
}
}

Reviews
There are no reviews yet.