Description

The IC697CMM742 module is an Ethernet Interface designed by GE for
series 90-70 Type 2.The IC697CMM742 module is an Ethernet Interface designed by GE for
series 90-70 Type 2.​GE Series 90-70 Cpu Parts,Io Bus Terminator Plug,Ge Fanuc Terminal
Block PLC CPU PARTS Programmable PLC Communicate MODULES Robots
DCS. ​The IC697CMM742 module is equipped with three network ports that
establish connection between the IC697 PLC and Ethernet LAN. The
Ethernet interface module’s network port is standard and designed
with 15 pins that offer a choice of 10Base5, 10Base2, 10BaseT,
10BaseF, or 10Broad36 medium with a user-supplied 802.3-compatible
transceiver.

The IC697CMM742 Ethernet interface (type 2) also includes preloaded
firmware for simple installation; additionally, firmware is easy to
upgrade and maintained indefinitely. This interface provides data
exchange via configuration/logic-based Ethernet global data, TCP/IP
communication via SRTP, full PLC programming/configuration, and
comprehensive station management/diagnostic tools.

The IC697CMM742 Ethernet interface is equipped with four LEDs:
MODULE OK, LAN ONLINE, SERIAL ACTIVE, and STATUS OK. If diagnostics
are successful, the MODULE OK LED will emit ON. If diagnostics
fail, the LED will remain OFF. Blinking during diagnostics is
normal and/or indicates special operation conditions. The LAN
ONLINE LED will emit ON when connected to the network and ready. It
will emit OFF if there is a disruption or malfunction. Blinking is
normal to indicate transferring data. SERIAL ACTIVE will show OFF
during inactivity and will blink during data transfer. STATUS OK is
ON indicates normal operation. OFF indicates an event that needs
the user’s attention, and again, blinking is normal.

The IC697CMM742 is also equipped with a restart button that has four purposes: LED
test, restart, restart and enter software load state and restart
and enter maintenance state. Please see the IC697CMM742 manual for
additional information.

IC697CHS750 A five slot rear mounting PLC rack, the GE Fanuc 90-70
IC697CHS750 accepts all IC697 PLC module types. Featured on the GE
Fanuc 90-70 IC697CHS750 are rear…
IC697CHS770 GE Fanuc 90-70 IC697CHS770 Accepts all IC697 PLC module
types, and IC687 (VME) I/O and Communications module types. GE
Fanuc 90-70 IC697CHS770 Accepts plug-in… GENERY ELETRIC
IC200ALG264

GENERY ELETRIC IC200ALG322

GENERY ELETRIC IC200ALG620

GENERY ELETRIC IC200ALG630

GENERY ELETRIC IC200MDL740

GENERY ELETRIC IC693ACC310

GENERY ELETRIC IIC693ALG223

GENERY ELETRIC IC693APU300

GENERY ELETRIC IC694ALG392

GENERY ELETRIC IC693MDL645

GENERY ELETRIC IC693MDL646

GENERY ELETRIC IC693MDL655

GENERY ELETRIC IC693MDL730

GENERY ELETRIC IIC693MDL740

GENERY ELETRIC IC693PCM301

GENERY ELETRIC IC693MDL753

GENERY ELETRIC IC693PWR321

GENERY ELETRIC IIC694BEM331

GENERY ELETRIC IC693PWR330

GENERY ELETRIC IC694APU300

GENERY ELETRIC IC694MDL645

GENERY ELETRIC IC200UDR005-AA

GENERY ELETRIC IC660BBD025

GENERY ELETRIC IC697BEM711

GENERY ELETRIC IC697BEM713

GENERY ELETRIC IIC697BEM731

GENERY ELETRIC IC697BEM733